THE T-SEAM® – STANDING SEAM ROOFING SYSTEM

T-Seam® roofs are accessible both during and after installation, for maintenance and cleaning. It is recommended that proper access walkways are installed for access to roof mounted units such as skylights, exhaust, chimneys etc., which require regular maintenance.

Fully seamed T-Seam® roof can be walked upon, without the use of load spreading elements as per the following support spacing.

It is also recommended to use higher density, rigid insulation panels at the eaves (near gutter) and the ridge in order to avoid any materials deformation due to regular foot traffic.

During installation of the roof, the areas of the roof which are either frequently walked or used for transport of materials should be protected with temporary walkways. These walkways should be anchored to the seam clips to avoid slipping of the walkway elements.

T-Seam® fall arrest offers a safe and reliable solution for securing the personnel accessing the roof. This consist of a stainless steel wire rope which is fastened permanently to the seam of the roof with specially designed stainless steel anchors.. The wire is kept at the right tension with the help of turnbuckles. The safety harness can be connected to the fall arrest clip spacing.